logocuoi.png

  • sk
  • sk
    HomeSẢN PHẢMFACTORY AUTOMATIONSunX - PanasonicSensors 〉 Laser Type Edge Detection Sensor LD

    ONLINE SUPPORT

    MR. TUNG

    0934 36 1799

    [email protected]

    Easy measurement of outer diameter

     

     

    59358187-e0a4-4a7a-a966-2bba671bed07

     

     

     

    CE , FDA Approved

    CE : EMC Directive

    FDA : LD-601 only

     

    Features

    High accuracy measurement

    A red semiconductor laser is used as the emitting device and CCD is used as the receiving device. An ideally parallel optical beam is emitted achieving highly accurate measurement.

     

    pic04

     

    FDA standard conforming

    FDA standard (Class II) conforming model LD-601 is available.

     

    Optical alignment not required

    Troublesome optical beam alignment is not required since the emitter and the receiver are mounted on one body.

     

    Safety countermeasures not required

    Safety countermeasures, such as protective gear, etc., are not required since LD-600 uses a Class 1 laser as per JIS standards, and LD-601 uses a Class II laser as per FDA standards.

     

    Stable sensing

    Shading correction function which compensates for receiver sensitivity variation and generates a uniform sensitivity distribution has been incorporated. Stable sensing over extended periods of time is possible.

     

    Various applications

    The sensor can be used for various applications with its binary data output with four different sensing modes.

     

    1. Width measurement / Dark mode

    The first dark region from the lower side of the measurement region is measured.

    Various applications

     

    2. Width measurement / Light mode

    The first light region from the lower side of the measurement region is measured.

    Various applications

     

    3. Edge measurement / Dark mode

    The first dark edge from the lower side of the measurement region is sensed and the width from the dark edge to the upper side of the measurement region is measured.

    Various applications

     

    4. Edge measurement / Light mode

    The first light edge from the lower side of the measurement region is sensed and the width from the light edge to the upper side of the measurement region is measured.

    Various applications

    THU DUC TECH Co., Ltd

    Address: : A12/2A  Le Van Viet, Tang Nhon Phu A Ward , 9 District, Ho Chi Minh City

    Phone: 0934 36 1799

    Email: [email protected]

    www.thuductech.com.vn

    0934 361 799